The best camera mounts depend on what you need to attach and where you plan to place it, from a monitor on a cage to an action camera on a handlebar. These picks cover clamps, articulated arms, monitor holders, and a tabletop stand; check the mounting interface and rated load before choosing.
Quick Top Products
SmallRig Cool Ballhead Arm Clamp 1138
- Clamps to rods, tubes, tables, frames, or tripods.
- Includes a 1/4-20 screw and an action camera adapter.
- Maximum capacity is 1.5 kg.
Best For: Creators who want to clamp a camera or accessory to a desk, rod, or frame.
SmallRig 9.8-Inch Magic Arm Clamp Kit
- The arm measures 9.8 inches (25 cm).
- The clamp opens from 15 mm to 54 mm.
- The ball heads rotate 360 degrees.
Best For: Users who need to position a monitor, light, or microphone away from a clamped support point.
SmallRig Field Monitor Mount BSE2346
- Designed for 5-inch and 7-inch monitors.
- Offers 360-degree swivel and 140-degree tilt.
- Supports monitors up to 1.2 kg.
Best For: Camera operators attaching a 5- or 7-inch monitor through a cold shoe.
SmallRig Mini Ball Head Mount 2059
- The pack includes two mini ball-head mounts.
- It attaches via a cold shoe and has a 1/4-inch screw.
- The ball head can be adjusted to different positions.
Best For: Photographers who want two adjustable cold-shoe mounts for lightweight accessories.
SmallRig Adjustable Monitor Mount 6314
- The bottom uses a 3/8-16 ARRI locating screw.
- It supports 360-degree pan and 180-degree tilt.
- It can mount a monitor horizontally or vertically.
Best For: Video crews who need an anti-twist monitor mount that can work in horizontal or vertical orientation.
SmallRig 11-Inch Magic Arm Clamp 5311
- The arm measures 11 inches.
- The clamp fits diameters from 15 to 40 mm.
- Maximum payload is 1.5 kg.
Best For: Vloggers and studio creators who need a longer clamped arm for small accessories.
SmallRig Motorcycle and Bike Camera Mount 4102B
- The clamp fits rods from 14 mm minimum and surfaces up to 65 mm thick.
- The ball head rotates 360 degrees for portrait or landscape positioning.
- The stated moving-device limit is 350 g.
Best For: Action-camera users mounting gear to a bike or motorcycle handlebar within the stated movement limits.
SmallRig Adjustable Desk Camera Stand 3488
- Height adjusts from 19 to 39 inches with the ball head and clamp.
- The clamp fits tables up to 1.85 inches thick.
- Maximum load is 3 kg.
Best For: Streamers and creators who need a clamped desk stand for cameras, phones, or ring lights.
SmallRig Camera Monitor Mount 6313
- The mount installs through a cold shoe or hot shoe.
- It offers 180-degree tilt and 360-degree pan.
- Tilt damping adjusts by thumb knob.
Best For: Video creators who want a removable cold-shoe monitor mount with portrait and landscape adjustment.
SmallRig Monitor Mount 2174
- Designed for 5-inch or 7-inch monitors up to 1.5 kg.
- The rotation axis adjusts up to 146 degrees.
- The mount tightens by hand using a thumbscrew.
Best For: Camera operators with an ARRI locating point who need a hand-adjustable 5- or 7-inch monitor mount.
Flexible Clamp for Desks and Tubes
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 pairs a super clamp with a dual ball head and an action camera adapter. Its 1/4-20 screw supports cameras, monitors, lights, microphones, and other gear, while the clamp attaches to a rod, tube, table, frame, or tripod without drilling.
The aluminum and stainless steel construction has a stated maximum capacity of 1.5 kg. That makes it a versatile option for a fixed desktop or rig position, though the maker specifically advises using a safety rope in dynamic scenarios.
Choose it when you want one clamp for several kinds of small accessories and mounting points.
Best For: Creators who want to clamp a camera or accessory to a desk, rod, or frame.
| Pros | Cons |
|---|---|
|
|
Choose this clamp if your setup moves between a desk, a tube, and other rigid mounting points, or if you need the included action camera adapter. Its 1.5 kg capacity makes it a fit for smaller gear rather than a catchall support for heavy equipment.
Before buying, check that the clamp opening and your mounting surface match; the supplied notes do not give its jaw range. Use the safety rope for dynamic setups as advised.
Long Arm with Interchangeable Clamp Threads
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit combines a 9.8-inch articulating arm with a super clamp. The arm has 1/4-inch screws at both ends, while the clamp offers 1/4-inch and 3/8-inch threads and fits openings from 15 mm to 54 mm.
Its double ball heads rotate 360 degrees, providing room to angle a monitor or other accessory around a camera rig. Rubber cushions help protect contact surfaces and improve grip.
The package includes one arm and one clamp. It is a useful choice when reach and angle adjustment matter, but the supplied details do not state a load limit, so confirm suitability for your attached gear before use.
Best For: Users who need to position a monitor, light, or microphone away from a clamped support point.
| Pros | Cons |
|---|---|
|
|
Pick this kit when a short articulated reach helps place a monitor or light around your camera rig, and when the clamped surface falls within its stated jaw range. Its threaded clamp and two-ended 1/4-inch arm give it more interface options than a fixed ball head.
The supplied details do not establish a payload limit, so check the combined weight of the accessory and any adapter before relying on it. Avoid seawater exposure.
Cold-Shoe Holder for Field Monitors
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
The BSE2346 is a compact holder designed for 5-inch and 7-inch field monitors. A cold shoe connects it to the camera or another mounting system, and a bottom 1/4-20 screw secures the monitor.
The mount swivels 360 degrees horizontally and tilts 140 degrees vertically, so you can set a viewing angle for different filming positions. Rubber cushions protect the monitor surface, and the CNC-machined aluminum mount supports monitors up to 1.2 kg.
It includes a hex spanner. This is a focused choice for a monitor on a cold-shoe-equipped rig; check both the monitor's weight and the mounting interface before buying.
Best For: Camera operators attaching a 5- or 7-inch monitor through a cold shoe.
| Pros | Cons |
|---|---|
|
|
Choose the BSE2346 when your monitor falls within the stated screen sizes and weight limit, and your camera or support has a cold shoe. Its 140-degree tilt range and 360-degree horizontal swivel give you room to adjust the viewing angle, while the cold-shoe connection can make it a straightforward fit for compatible rigs.
Confirm the monitor's weight and how the mount will attach to your camera before purchasing; the package includes a display mount and spanner.
Two-Piece Mini Ball-Head Set
SmallRig 1/4" Camera Hot Shoe Mount, Ballhead Tripod with Additional 1/4" Screw, 2pcs Pack - 2059
This two-piece pack provides a pair of mini ball-head mounts, each with a cold-shoe adapter and a 1/4-inch screw. The ball head adjusts to different positions and locks with a wingnut, letting you change the angle of a compatible camera or monitor attachment.
The cold shoe works with many camera brands, including Canon, Nikon, Panasonic, and Fujifilm. The maximum load is 3 kg per the supplied notes, though the mount's compact size is best suited to accessories that fit its interfaces.
This pack is useful when you need two mounting points, but make sure the accessory has the appropriate shoe or threaded connection.
Best For: Photographers who want two adjustable cold-shoe mounts for lightweight accessories.
| Pros | Cons |
|---|---|
|
|
Consider this pack if you want two small mounts for cold-shoe-compatible gear and can use the included 1/4-inch screws for your setup. Its main distinction is quantity: the package contains two mounts, while a single-piece option is mentioned in the notes.
The stated load limit is 3 kg, but the notes do not clarify whether that figure applies per mount or to the pair. Confirm the connection and intended load for each mounting point before buying.
ARRI Locating Mount for Landscape or Portrait
SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting
The SmallRig 6314 connects a monitor to a cage, top handle, or other support through an ARRI-style 3/8-16 locating screw. Its top has a retractable 1/4-20 locating screw and locating pins to help resist twisting, while a silicone pad protects the monitor.
The mount pans 360 degrees and tilts 180 degrees, with tilt damping that adjusts by thumb knob for different device weights. It supports horizontal and vertical installation and weighs 75.6 g.
Choose it for a rig with the matching locating hole and a monitor that fits the top connection; the supplied details do not specify its supported monitor weight.
Best For: Video crews who need an anti-twist monitor mount that can work in horizontal or vertical orientation.
| Pros | Cons |
|---|---|
|
|
Pick the 6314 if your rig has an ARRI locating hole and you need a monitor to rotate between landscape and portrait positions. The anti-twist features and adjustable damping suit a configurable video rig, but the notes provide no supported weight figure.
Check the monitor's attachment pattern and weight against the mount's requirements before buying. Its 75.6 g weight is useful context for a compact rig, not a payload rating.
11-Inch Arm for Clamped Rig Points
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm with a crab-shaped clamp for tubes, tables, tripod legs, or stabilizer rings measuring 15 to 40 mm in diameter. One end has a 1/4-20 screw with retractable pins, which helps keep compatible cages and accessories from twisting.
A single wingnut loosens or locks the ball joints, and the clamp includes anti-slip pads. The stated maximum payload is 1.5 kg.
This longer arm can position a light, monitor, microphone, or action camera away from its support point, though leverage and the payload limit make the intended load important to check.
Best For: Vloggers and studio creators who need a longer clamped arm for small accessories.
| Pros | Cons |
|---|---|
|
|
Choose this arm when you need the reach of an 11-inch articulated mount and have a support within its 15-to-40 mm clamp range. It has anti-twist pins for compatible 1/4-20 gear and a 1.5 kg maximum payload.
That combination suits lighter accessories such as an action camera, microphone, or small monitor. Check the arm's reach, support diameter, and total accessory weight before buying, especially if your setup places the load far from the clamp.
Handlebar Clamp with Motion Limits
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
The 4102B uses a crab-shaped clamp and 360-degree ball head to position an action camera, monitor, or light on a handlebar or other support. Its jaw fits a minimum rod diameter of 14 mm and surfaces up to 65 mm thick, and the removable adapter connects an action camera.
The stated capacity is 3.5 kg at rest, but the motion guidance is much lower: use no more than 350 g while moving, avoid rough terrain, attach a safety cord, and stay below 50 km/h. Those limits matter for a camera mount used on a moving vehicle.
Check your handlebar size and moving load before riding.
Best For: Action-camera users mounting gear to a bike or motorcycle handlebar within the stated movement limits.
| Pros | Cons |
|---|---|
|
|
This is the most directly vehicle-oriented option here, with a removable action-camera adapter and jaw range suited to handlebars and other supports. For a stationary setup, the stated capacity is 3.5 kg; while moving, follow the separate 350 g device limit and the specified operating guidance.
Do not use the at-rest figure to size a riding setup. Check your handlebar diameter, camera plus adapter weight, and whether your camera needs a compatible cage.
Height-Adjustable Tabletop Camera Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
The SmallRig 3488 is a tabletop stand with a C-clamp, three-section extension pole, 1/4-inch ball head, and ring-light adapter. Its height adjusts from 19 to 39 inches with the ball head and clamp, and the head rotates 360 degrees with front tilt from -90 to +45 degrees.
The clamp accommodates tables up to 1.85 inches thick, and the stand's stated maximum load is 3 kg. At 15 ounces, it is designed as a portable alternative to a floor tripod for a desk-based setup.
Check desk thickness, available clearance, and total mounted weight before choosing it.
Best For: Streamers and creators who need a clamped desk stand for cameras, phones, or ring lights.
| Pros | Cons |
|---|---|
|
|
Choose the 3488 for a desk-based camera, phone, or ring-light setup where a tall adjustable position saves floor space. Its 19-to-39-inch height range and 3 kg maximum load make the intended use clearer than a small clamp arm, but it depends on a compatible desk edge and enough clearance above it.
Measure the desk thickness and check the weight of the complete mounted setup. The included ball head can be removed if you need its 1/4-20 connection for another device.
Cold-Shoe Monitor Mount with Damping Control
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The 6313 attaches to a cold shoe or hot shoe and locks in place for quick installation and removal. A bottom 1/4-20 threaded hole also supports attachment to an accessory such as a magic arm.
On top, a retractable 1/4-20 locating screw, locating pins, and silicone pad help secure a compatible monitor against twisting and scratches. The mount tilts 180 degrees, pans 360 degrees, and adjusts tilt damping by thumb knob.
It supports horizontal and vertical installation. Choose it when flexible positioning and a shoe connection suit your rig; confirm your monitor's top interface and weight, since a payload limit is not provided in the supplied details.
Best For: Video creators who want a removable cold-shoe monitor mount with portrait and landscape adjustment.
| Pros | Cons |
|---|---|
|
|
Consider the 6313 if you want a removable shoe-mounted option with full pan and substantial tilt, plus the ability to switch between portrait and landscape framing. It also has a 1/4-20 threaded hole for a different support path.
The supplied details do not state a payload limit or clarify what monitor hardware comes in the box, so check both before buying. This mount fits best when your camera already has a usable shoe and your monitor matches the top screw and locating features.
ARRI-Style Holder for 5- or 7-Inch Monitors
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174
The 2174 attaches to a cage or handle through a 3/8-inch threaded hole for ARRI standard. It supports 5-inch or 7-inch monitors weighing up to 1.5 kg, and its rotation axis adjusts the display position through 146 degrees.
A thumbscrew tightens the mount by hand for quick installation, with an Allen-wrench hole available for additional tightening. If your cage lacks ARRI locating holes, the notes say an optional Mini Plate 2171 can connect through two 1/4-inch threaded holes.
This is a practical option for rigs with the right base interface; verify your cage's locating point and your monitor's weight before purchase.
Best For: Camera operators with an ARRI locating point who need a hand-adjustable 5- or 7-inch monitor mount.
| Pros | Cons |
|---|---|
|
|
Pick the 2174 if your camera cage or handle has the ARRI-style locating point and your monitor fits its 5- or 7-inch, 1.5 kg limits. Its hand-tightened base and 146-degree rotation make it a simpler fit for a rig that does not need a full turn.
If your cage only has 1/4-inch threaded holes, the optional Mini Plate 2171 is a separate compatibility consideration. Check the base interface and monitor weight before purchase.
How to Choose Camera Mounts
How We Picked Best Camera Mounts
A useful camera mount should solve a clear placement problem and match the equipment it carries. This selection covers several distinct jobs: clamping a rig to a support, positioning a small accessory on an articulated arm, holding a field monitor, attaching to a cold shoe, and elevating a camera above a desk.
Camera-specific cages, handles, power holders, and rod blocks were left out because they serve narrower rig-building roles than a general mount.
Fit and capacity matter as much as movement. The picks include clamps with stated jaw ranges, monitor holders with defined monitor sizes or weight limits, and a desk stand with a stated height range and table-thickness limit.
Where the supplied facts do not give a payload limit, that unknown is called out so buyers can check before mounting gear. Vehicle use receives separate care because a stationary load rating does not describe safe use in motion.
Comparing Camera Mount Types and Interfaces
Start with the attachment point. A cold-shoe holder such as the BSE2346 or 6313 suits a camera or rig with a shoe; the 2174 and 6314 use ARRI-style locating connections.
A clamp arm works when a table edge, rod, tripod leg, or handlebar is the support, but jaw ranges differ. For example, the 5311 covers supports from 15 to 40 mm, while the 1138 notes rod, tube, table, frame, and tripod use without stating a jaw range.
Next, consider the amount and direction of adjustment. The 9.8-inch arm gives reach around a clamped point.
Monitor mounts trade portability and interface style against tilt and pan options: the BSE2346 swivels horizontally and tilts vertically, while the 6313 adds portrait or landscape mounting. A fixed desktop setup may be better served by the 3488, whose pole adjusts from 19 to 39 inches and clamps to a desk.
Match the complete mounted equipment weight to the relevant capacity, not just the camera body.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig Cool Ballhead Arm Clamp 1138Check Price |
| Creators who want to clamp a camera or accessory to a desk, rod, or frame. |
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Users who need to position a monitor, light, or microphone away from a clamped support point. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Camera operators attaching a 5- or 7-inch monitor through a cold shoe. |
| SmallRig Mini Ball Head Mount 2059Check Price |
| Photographers who want two adjustable cold-shoe mounts for lightweight accessories. |
| SmallRig Adjustable Monitor Mount 6314Check Price |
| Video crews who need an anti-twist monitor mount that can work in horizontal or vertical orientation. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and studio creators who need a longer clamped arm for small accessories. |
| SmallRig Motorcycle and Bike Camera Mount 4102BCheck Price |
| Action-camera users mounting gear to a bike or motorcycle handlebar within the stated movement limits. |
| SmallRig Adjustable Desk Camera Stand 3488Check Price |
| Streamers and creators who need a clamped desk stand for cameras, phones, or ring lights. |
| SmallRig Camera Monitor Mount 6313Check Price |
| Video creators who want a removable cold-shoe monitor mount with portrait and landscape adjustment. |
| SmallRig Monitor Mount 2174Check Price |
| Camera operators with an ARRI locating point who need a hand-adjustable 5- or 7-inch monitor mount. |
Choosing a Camera Mount for Video Monitors
Monitor mounts vary most in their base connection, screen fit, and anti-twist details. The BSE2346 is intended for 5- and 7-inch displays and uses a cold shoe below with a 1/4-20 screw for the monitor.
The 2174 accepts those screen sizes too, but attaches at an ARRI locating point and states a maximum monitor weight of 1.5 kg. The 6314 and 6313 offer horizontal and vertical installation; their supplied details do not specify maximum monitor weight.
For a monitor that must change position often, check whether you need full pan, portrait orientation, or a quick-removal shoe. Also verify the monitor's top screw pattern and whether the cage or handle has the right bottom interface.
A mount that can tilt widely may still be unsuitable if it cannot attach securely to the rig or carry the display's weight.
Clamps and Camera Mounts for Desks, Tubes, and Vehicles
For desk edges and fixed rig supports, check the clamp's opening range and the shape of the surface. The 9.8-inch kit accepts openings from 15 to 54 mm, while the 11-inch 5311 is specified for supports with 15-to-40 mm diameters.
The 3488 is a different choice: it is a desk C-clamp stand with a 1.85-inch maximum table thickness and a taller adjustable pole. Those dimensions describe different mount styles, so measure the actual support rather than relying on the product name.
A handlebar camera mount needs extra attention because movement changes the load conditions. The 4102B gives a 3.5 kg at-rest capacity but limits the device to 350 g while moving, with instructions to avoid rough terrain, use a safety cord, and stay below 50 km/h.
Treat those movement limits as central to the decision. Check the clamp fit and camera-plus-adapter weight before using it on a vehicle.
Who Should Buy Which Camera Mount?
Choose a cold-shoe holder if you need compact monitor positioning and your rig has a compatible shoe. Choose an ARRI-style mount if your cage or handle has the locating hole and the display fits its stated size and weight limits.
An articulated clamp arm is the more flexible option for a light, microphone, or monitor that needs to sit away from the camera, provided the support surface fits the jaws and the payload is within range.
For streaming or desk recording, the 3488 is designed around a table clamp and adjustable pole. For a bike or motorcycle setup, the 4102B is the specialized fit, but only when the moving load and use conditions meet its specific limits.
If you are choosing between similar mounts, decide first where it will attach, then verify the connection type, support dimensions, adjustment range, and total mounted weight.